Fuel Tech Experts
  • Articles
    • Biodiesel & Biofuels
    • Car Emissions
    • Carbon Cleaning
    • Cetane Boosters & 2-EHN
    • DPF Cleaning & Maintenance
    • EGR Cleaning & Maintenance
    • Engine Cleaning & Flushing
    • Engine Oils
    • Engine Tuning & Mapping
    • Fleet & Commercial Solutions
    • Fuel Addtives
    • Fuel Quality
    • Fuel Saving
    • Fuel System Cleaning
    • Hybrids
    • MAF & Air Intake Cleaning
    • Misfuelling Devices
    • Octane Boosters
    • Oil Additives
    • Race Fuel
    • Reducing Emissions
    • TFSI Direct Injection Carbon
    • Turbo Cleaning & Maintenance
    • Waterless Engine Coolant
  • Reviews
    • Reviews UK
    • Reviews USA
  • Tools
    • 2-EHN Cetane Calculator
  • About Us
  • Collaborate
An image of Alex
  • top of site banner
  • Try our new cetane calculator

All posts by FTE

EGR with a red strike through the image
EGR Cleaning & Maintenance

EGR Delete Issue from a Concerned Customer

October 11, 2024 FTE Leave a comment

This is a recent message I received from a customer regarding an EGR delete carried out on his vehicle.

“I have a VW T5.1 and the coil light illuminated a couple of months ago. I took it to a garage who diagnosed a faulty EGR valve and Cooler. I took advice from friends and family to have the EGR deleted at a cost of £130 rather than the quoted £1100 to replace the EGR valve and cooler. 

Within 100 miles, the DPF regen light came on, followed by limp mode. I took it back to the remapping company who forced the regen and said it was fine. 

I drove up to Inverness (400 miles) where the DPF regen light came on again, and then the van went into limp mode. A remapping garage in Inverness forced it into regen mode again and I managed to get home before the DPF came on again. I took the van to a specialist DPF cleaner company who stated that DPF was full of ash and soot and cleaned it out. I drove the van for a week (around 200 miles) before the DPF regen light came on again. 

Before I spend a lot of money at the VW garage, do you have any thoughts/advice?”

Unfortunately, this is not uncommon. Whoever worked on this car failed to investigate the root cause of the problem, and forcing the DPF to regen every few hundred miles is only addressing the symptoms.

The engine ECU will not permit a passive DPF regeneration if a problem is detected.  This would include any anomaly it detects with the EGR function.  If the EGR delete has not been coded correctly, then the DFF won’t be able to regenerate on its own.  Writing the warning light/code out of the software is not always sufficient as the ECU needs to “see” via various sensor outputs, that the EGR is operating correctly.  If the DPF problem started after the EGR deletion, then that should be investigated first.

It is also worth noting that it is an offense to use a vehicle with any part of the emission control system modified to alter the emissions standards it was originally designed to meet. I hope the customer was advised of this.

1075
car emissionsdffdiesel emissionsdpfecuEGRegr deleteegr issueegr valveemission controlemissionsvehicle emissions
STP Ultra Diesel System Cleaner 5 in 1
Reviews UK

STP Ultra 5 in 1 Diesel Fuel System Cleaner Review

October 4, 2024 FTE Leave a comment
Expert Product Review & Performance Analysis
Made in the UK
STP Ultra 5 in 1 Diesel Fuel System Cleaner 400ml - Restores Power and Protects your Engine

Product Overview

STP Ultra 5 in 1 Diesel Fuel System Cleaner represents the pinnacle of comprehensive diesel engine maintenance technology, earning an exceptional 4.6/5 star rating from 3,401 customers who have experienced its transformative 5-in-1 cleaning and protection capabilities. This advanced 400ml concentrated formula, proudly made in the UK, delivers unparalleled diesel fuel system treatment through its innovative approach that simultaneously saves fuel, restores performance, cleans deposits, reduces friction, and inhibits corrosion in a single comprehensive treatment. The professional-grade concentrate combines STP’s decades of automotive chemical expertise with cutting-edge WEARGUARD technology to address the complex challenges of modern diesel engines through systematic cleaning of the entire fuel delivery system while providing measurable improvements in engine performance, fuel economy, and emission reduction. With its proven ability to clean and condition the entire fuel delivery system in one tank, remove harmful deposits that compromise peak engine performance, and protect key engine parts from wear and corrosion, this revolutionary 5-in-1 solution eliminates the need for multiple separate products while delivering superior results that consistently exceed customer expectations and establish new standards for diesel engine maintenance excellence.

4.6/5
Amazon Rating
3,401
Customer Reviews
5-in-1
System Benefits
UK Made
Quality Standards
Functions and Benefits
4.8/5

STP Ultra 5 in 1 Diesel Fuel System Cleaner delivers exceptional comprehensive cleaning and protection capabilities through its revolutionary 5-in-1 formulation that addresses multiple critical diesel engine systems simultaneously, providing unmatched value and convenience through a single comprehensive treatment that eliminates the need for multiple separate products while delivering superior results across all aspects of diesel engine maintenance and performance optimization.

Comprehensive 5-in-1 Benefits:

  • Saves fuel through optimized combustion efficiency and reduced engine friction
  • Restores performance by removing harmful deposits that compromise peak engine operation
  • Cleans deposits throughout the entire fuel delivery system for optimal flow
  • Reduces friction with advanced STP WEARGUARD technology for engine protection
  • Inhibits corrosion to protect key engine parts from wear and degradation
  • Complete fuel delivery system cleaning and conditioning in one tank treatment
  • Concentrated cleaning power that cleans and conditions entire fuel system
  • Proven effectiveness in reducing diesel consumption and exhaust emissions
Notable Technologies
4.6/5

STP Ultra 5 in 1 incorporates advanced automotive chemical technology through its concentrated cleaning formula and innovative STP WEARGUARD technology, representing decades of STP engineering expertise in professional diesel engine maintenance solutions. The advanced formulation combines multiple high-performance technologies to deliver comprehensive cleaning and protection enhancement.

Advanced Technology Features:

  • STP WEARGUARD technology for advanced friction reduction and engine protection
  • Concentrated cleaning formula for maximum effectiveness per treatment
  • 5-in-1 comprehensive system approach eliminating need for multiple products
  • UK manufacturing quality standards and automotive chemical expertise
  • Professional-grade deposit removal and fuel system conditioning technology
  • Advanced corrosion inhibition technology for long-term engine protection
  • Proven fuel economy enhancement through optimized combustion efficiency
Ease of Use
4.9/5

The product offers exceptional ease of use through its simple fuel tank application method that requires no mechanical intervention or specialized equipment, making professional-grade diesel system cleaning accessible to all vehicle owners while delivering reliable, measurable results through straightforward application procedures that work through normal driving.

Application Advantages:

  • Simple fuel tank additive application with no mechanical intervention required
  • 400ml treats one full tank of diesel fuel for convenient dosing
  • Add to fuel tank before refueling for optimal mixing and distribution
  • Works through normal driving for convenient treatment completion
  • Concentrated formula eliminates need for multiple separate treatments
  • Compatible with all diesel engines and fuel types
  • Clear application instructions for optimal results and effectiveness
Popularity
4.7/5

STP Ultra 5 in 1 enjoys exceptional market recognition with 4.6/5 stars from 3,401 customer reviews, widespread adoption by both professional mechanics and vehicle owners, and strong brand recognition through the established STP reputation for automotive chemical excellence and proven effectiveness in diesel engine maintenance applications.

Market Recognition:

  • Exceptional 4.6/5 stars from 3,401 customer reviews on Amazon UK
  • Established STP brand with decades of automotive chemical expertise
  • Made in the UK quality standards and manufacturing excellence
  • Strong customer satisfaction with proven repeat purchase rates
  • Positive reception in automotive forums and professional communities
  • Widely recommended by diesel engine specialists and technicians
  • Professional endorsements from automotive service centers and workshops
Revolutionary 5-in-1 Diesel System Technology

STP Ultra 5 in 1 Diesel Fuel System Cleaner represents the culmination of decades of STP automotive chemical engineering expertise, delivering revolutionary 5-in-1 cleaning and protection technology that addresses the complex challenges of modern diesel engines through comprehensive fuel system treatment and advanced deposit removal capabilities. The innovative formulation simultaneously saves fuel, restores performance, cleans deposits, reduces friction, and inhibits corrosion in a single comprehensive treatment that eliminates the need for multiple separate products while delivering superior results through its concentrated cleaning power and advanced STP WEARGUARD technology. This comprehensive approach to diesel engine maintenance combines professional-grade deposit removal, fuel system conditioning, and engine protection to deliver measurable performance restoration and fuel economy improvements that exceed traditional single-purpose cleaners. The exceptional 4.6/5 star rating from 3,401 customers, combined with UK manufacturing quality standards and proven effectiveness in reducing diesel consumption and exhaust emissions, makes this product the definitive choice for vehicle owners seeking reliable, proven diesel engine maintenance solutions that deliver consistent results and long-term engine protection through innovative 5-in-1 technology.

Customer Sentiment
4.6/5

Customer feedback for STP Ultra 5 in 1 is overwhelmingly positive, with users consistently reporting improvements in engine smoothness, fuel economy, and overall performance. The 4.6/5 Amazon rating from 3,401 reviews reflects exceptional customer satisfaction and product effectiveness across diverse diesel applications and vehicle types.

What Customers Love Considerations
Noticeable improvements in engine smoothness and responsiveness Results may vary depending on engine condition and maintenance history
Enhanced fuel economy and reduced diesel consumption Some users report minimal immediate noticeable improvements
Easy application with no mechanical intervention required Fuel filler security systems may require tube/funnel for application
5-in-1 comprehensive treatment eliminates multiple products Designed for larger fuel tanks (50-60L), may need adjustment for smaller vehicles
UK manufacturing quality and established STP brand reputation Premium pricing reflects professional-grade formulation and effectiveness
Proven effectiveness for preventive maintenance and engine protection Best results achieved through regular use rather than one-time treatment
Competitor Comparison
4.5/5

STP Ultra 5 in 1 competes effectively in the diesel treatment market through its comprehensive 5-in-1 approach, UK manufacturing quality, and established STP brand reputation, positioning itself as a premium solution among established diesel maintenance products while delivering exceptional value through its multi-system treatment capabilities.

Competitive Landscape:

  • Oilsyn products (innovative UK technology with advanced formulations and cutting-edge chemistry)
  • PowerEnhancer solutions (strong UK market presence with proven effectiveness and reliability)
  • STP Ultra 5 in 1 (comprehensive 5-in-1 treatment with UK manufacturing and proven results)
  • Wynn’s Extreme Diesel System Cleaner (4.5/5 stars, 3,079 reviews, professional-grade cleaning)
  • Redex Diesel Fuel System Cleaner (4.6/5 stars, 3,783 reviews, established market presence)
Overall Performance
4.7/5

STP Ultra 5 in 1 delivers exceptional overall performance through its comprehensive 5-in-1 cleaning and protection capabilities, proven effectiveness, and professional-grade formulation that consistently exceeds customer expectations while providing measurable improvements in engine performance, fuel economy, and emission reduction across diverse diesel applications.

Performance Excellence:

  • Exceptional 4.6/5 stars from 3,401 customer reviews demonstrating proven effectiveness
  • Revolutionary 5-in-1 comprehensive treatment eliminating need for multiple products
  • UK manufacturing quality standards ensuring consistent performance and reliability
  • Advanced STP WEARGUARD technology for superior friction reduction and engine protection
  • Proven fuel economy improvements through optimized combustion efficiency
  • Consistent customer satisfaction with measurable performance improvements
  • Professional-grade concentrate formulation for maximum cleaning effectiveness
Value for Money
4.6/5

STP Ultra 5 in 1 provides excellent value for money through its comprehensive 5-in-1 cleaning and protection capabilities, proven effectiveness, and professional-grade formulation that delivers measurable performance improvements while offering significant cost savings compared to purchasing multiple separate diesel treatment products.

Value Analysis:

  • Comprehensive 5-in-1 treatment eliminates need for multiple separate products
  • Professional-grade concentrate formulation provides maximum effectiveness per treatment
  • Proven fuel economy improvements provide ongoing cost savings through reduced consumption
  • UK manufacturing quality ensures consistent performance and reliability
  • Established STP brand reputation provides confidence and peace of mind
  • Cost-effective alternative to professional fuel system cleaning services
  • Long-term engine protection reduces maintenance costs and extends engine life

Final Verdict

4.6
Overall Rating

Comprehensive 5-in-1 diesel cleaning excellence with proven UK quality

STP Ultra 5 in 1 Diesel Fuel System Cleaner represents the pinnacle of comprehensive diesel engine maintenance technology, delivering revolutionary 5-in-1 cleaning and protection capabilities that have earned exceptional customer satisfaction through its proven ability to simultaneously save fuel, restore performance, clean deposits, reduce friction, and inhibit corrosion in a single comprehensive treatment. The impressive 4.6/5 Amazon customer rating from 3,401 reviews reflects the consistent effectiveness of this professional-grade concentrate, which combines decades of STP automotive chemical expertise with advanced WEARGUARD technology to address the complex challenges of modern diesel engines through systematic treatment of the entire fuel delivery system while providing measurable improvements in engine performance, fuel economy, and emission reduction. This comprehensive approach eliminates the need for multiple separate products while delivering superior results through its concentrated cleaning power and innovative UK manufacturing quality standards.

The professional-grade formulation consistently delivers measurable improvements in engine performance, with proven fuel economy enhancements through optimized combustion efficiency and comprehensive system cleaning that addresses deposit formation at its source while providing advanced engine protection through friction reduction and corrosion inhibition. The simple fuel tank application method makes professional-grade diesel system cleaning accessible to all vehicle owners, while the concentrated formula ensures maximum effectiveness per treatment through convenient one-tank application that works through normal driving. The proven track record of customer satisfaction, engine performance restoration, and fuel economy improvement makes this product an essential tool for maintaining optimal diesel engine operation while ensuring long-term reliability and efficiency.

For diesel vehicle owners seeking comprehensive 5-in-1 cleaning and protection technology with proven effectiveness and UK manufacturing quality, STP Ultra 5 in 1 Diesel Fuel System Cleaner represents an outstanding investment in automotive excellence that delivers consistent results and long-term engine protection. The exceptional customer satisfaction record, comprehensive cleaning capabilities, and innovative WEARGUARD technology make this product the definitive choice for those who demand professional-grade results and refuse to compromise on quality. While positioned as a premium solution, the exceptional value delivered through comprehensive 5-in-1 treatment, proven effectiveness, and UK manufacturing quality makes this revolutionary cleaning system an outstanding choice for discerning vehicle owners who prioritize engine performance, fuel economy, and long-term reliability in their diesel engine maintenance decisions.

Amazon eBay
Paid link

As an Amazon Associate and eBay Partner Network participant, I earn from qualifying purchases. This means that if you click on a link to a product on Amazon or eBay from this website and make a purchase, I may receive a small commission at no additional cost to you. This helps support the site and allows me to continue creating high-quality reviews. I only recommend products I genuinely believe in. Thank you for your support!

9
Redec Petrol System Cleaner, Suitable for Hybrids, Protects against corrosion from E10 petrol, Reduces Emissions
Reviews UK

Redex Petrol System Cleaner

June 23, 2024 FTE Leave a comment
Affiliate Disclosure As an Amazon Associate and eBay Partner Network participant, I earn from qualifying purchases. This means that if you click on a link to a product on Amazon or eBay from this website and make a purchase, I may receive a small commission at no additional cost to you. This helps support the site and allows me to continue creating high-quality reviews. I only recommend products I genuinely believe in. Thank you for your support!
Expert Product Review & Performance Analysis
UK Product
Redex Petrol System Cleaner Image score badge 4.3

Product Overview

Redex Petrol System Cleaner is a fuel additive specially developed to boost fuel efficiency, restore performance, and protect against E10 corrosion. This affordable and widely available fuel system cleaner is designed to remove harmful deposits that build up in your fuel system over time, helping to reduce emissions and improve engine performance. With a simple pour-in application and compatibility with all petrol engines including hybrids, Redex offers a convenient solution for regular fuel system maintenance at a budget-friendly price point.

Amazon Logo
Check Price
eBay Logo
Check Price
250ml
Bottle Size
£8.99
Typical Price
4.1/5
Customer Rating
2
Treatments Per Bottle

Product Purpose & Applications

Redex Petrol System Cleaner addresses a common issue in modern vehicles: the gradual accumulation of deposits in the fuel system. These deposits can form on fuel injectors, intake valves, and combustion chambers, leading to reduced performance, decreased fuel efficiency, and increased emissions. The introduction of E10 petrol (containing 10% ethanol) as the standard grade in the UK has further exacerbated these issues, as the higher ethanol content can cause corrosion and other problems in some vehicles.

The primary purpose of Redex Petrol System Cleaner is to dissolve and remove these harmful deposits, restoring engine performance and improving fuel economy. It’s designed as a maintenance product rather than a fix for severe problems, with the manufacturer recommending regular use to prevent deposit buildup rather than waiting until performance issues become noticeable.

Common Applications

  • Regular maintenance to prevent deposit buildup in the fuel system
  • Improving fuel economy in vehicles showing decreased MPG
  • Reducing exhaust emissions, particularly helpful before MOT tests
  • Restoring lost power and performance in petrol engines
  • Protecting against corrosion from E10 petrol
  • Addressing minor rough idling or hesitation issues
  • Cleaning fuel injectors to maintain optimal spray patterns
  • Preventive maintenance for vehicles that frequently use lower-quality fuels

Performance Ratings

Functions & Benefits
4.1/5

Redex Petrol System Cleaner performs its primary function of cleaning the fuel system adequately, though not exceptionally. The formulation is designed to dissolve carbon deposits and varnish that accumulate in the fuel system, particularly on injectors and intake valves. While it may not match the aggressive cleaning power of premium products with higher PEA (Polyetheramine) concentrations, it provides sufficient cleaning capability for regular maintenance purposes.

Key Benefits:

  • Cleans fuel injectors to maintain optimal spray patterns
  • Reduces carbon deposits in the combustion chamber
  • Helps protect against E10 petrol corrosion
  • Modest improvements in fuel economy for some users
  • Potential reduction in emissions, helpful for MOT tests
Notable Technologies
3.8/5

The technology behind Redex Petrol System Cleaner is relatively straightforward compared to premium competitors. It contains PEA (Polyetheramine), the industry-standard cleaning agent for fuel systems, though at a lower concentration than premium products. The formulation also includes corrosion inhibitors specifically designed to address the challenges posed by E10 petrol’s higher ethanol content, which can cause issues in fuel systems not designed for it.

Technical Features:

  • PEA-based cleaning formulation
  • E10 corrosion protection technology
  • Detergent package for fuel injector cleaning
  • Precise 2.5ml per liter dosing ratio
  • Compatible with all petrol engines including hybrids
Ease of Use
4.7/5

Redex excels in ease of use, with a simple pour-in application that requires no special tools or technical knowledge. The bottle is designed with a long neck that inserts like a fuel pump nozzle, making it easy to add to your tank. Clear dosage markers on the side of the bottle and straightforward instructions ensure proper application. The 250ml bottle contains 2 shots, with each shot treating one full tank of fuel (approximately 50 liters).

Usage Highlights:

  • Simple pour-in application
  • Clear dosage markers on bottle
  • No special tools or knowledge required
  • Compatible with all petrol engines
  • Can be added before or after filling with fuel
Popularity
4.5/5

Redex is one of the most popular and widely recognized fuel additive brands in the UK, with a long history dating back decades. The Petrol System Cleaner is readily available in supermarkets, auto parts stores, and online retailers, often at promotional prices. This widespread availability, combined with the affordable price point, has made it a go-to choice for many UK drivers looking for basic fuel system maintenance.

Market Presence:

  • Widely available in UK supermarkets and auto stores
  • Strong brand recognition among UK drivers
  • Frequently on promotion in major retailers
  • Established history in the UK market
  • Strong online presence and customer reviews
Value Proposition

What sets Redex Petrol System Cleaner apart in the crowded fuel additive market is its balance of affordability and effectiveness. While premium competitors may offer more aggressive cleaning formulations, they often come at 2-3 times the price. For regular maintenance and prevention of deposit buildup, Redex provides sufficient cleaning power at a price point that makes regular use economically feasible. This value proposition is particularly appealing for drivers of everyday vehicles who want to maintain their fuel system without investing in expensive professional-grade products that might be overkill for their needs.

Amazon Logo
Check Price
eBay Logo
Check Price

Technical Specifications & Formulation

Redex Petrol System Cleaner features a relatively straightforward formulation designed to clean fuel system components and protect against E10 corrosion. While the exact formulation is proprietary, it’s known to contain PEA (Polyetheramine), the industry-standard cleaning agent for fuel systems, along with corrosion inhibitors and other additives.

Key Technical Features

  • Contains PEA (Polyetheramine) for carbon deposit removal
  • Specific dosage of 2.5ml of Redex per liter of fuel
  • 250ml bottle contains 2 shots/doses
  • Each shot treats one full tank of fuel (approximately 50 liters)
  • Compatible with all petrol engines including hybrid systems
  • Specifically formulated to protect against E10 petrol corrosion
  • Manufacturer’s Code: RADD0056A
  • Suitable for regular use (every 3-4 tank fills recommended)
  • Can be combined with other Redex products like Octane Booster
  • Safe for catalytic converters and oxygen sensors

The formulation is designed to address deposits throughout the fuel system, from the fuel tank and lines to the injectors and combustion chamber. The cleaning action gradually dissolves carbon, gum, and varnish deposits that can accumulate over time, particularly in vehicles subjected to short trips or those using lower-quality fuels. The E10 protection component is particularly relevant given the UK’s switch to E10 as the standard petrol grade in 2021, which contains higher ethanol content that can cause issues in some vehicles.

Customer Experience & Reviews Analysis

Customer feedback for Redex Petrol System Cleaner reveals a mixed but generally positive experience. With an average rating of 4.1 out of 5 stars across various platforms, and 58% of reviews giving 5 stars, most users appear satisfied with the product. However, there’s a notable division in opinions, with some users reporting significant improvements while others question its effectiveness.

Common Positive Feedback

  • “Car seemed smoother and perkier after running a tank through with it” – PistonHeads forum user
  • “I use Redex, have for years now and am happy with the results, my cars always seem to run smooth with very good emission results” – Car forum user
  • “After a dose of Redex it was sweeter, with improved fuel consumption, then better still after the second dose” – FIAT Forum user
  • “Greatly improved performance on my old carburetted motorbike after it sat for months” – Reddit user
  • “This product has proven to be highly effective in cleaning out the dirt and grime that accumulates in the fuel system over time” – Amazon reviewer

Common Criticisms

  • “Redex does absolutely nothing. It’s complete snake oil. All the ingredients are already in petrol/diesel in the UK” – Reddit user
  • “The injector cleaners are a bit of con. Your fuel filter will get out any gunk” – Reddit user
  • “Difference to MPG was within margin of error though I saw a small improvement” – Forum user
  • “Over about 2,000 miles of mainly commuting in three months, my average fuel consumption using the Redex fuel system cleaners was 31.1mpg. My average before the trial was 30.9mpg – a negligible difference of 0.2mpg” – The Car Expert
  • Some users report no noticeable difference in performance or fuel economy

The pattern that emerges from customer reviews suggests that Redex Petrol System Cleaner may be most effective in vehicles with existing deposit issues or those that have been subjected to poor maintenance. Users with newer vehicles or those that regularly use premium fuels often report less noticeable improvements. This aligns with the product’s primary function of removing deposits that have already accumulated rather than providing performance enhancements to clean engines.

Comprehensive Pros & Cons Analysis

Advantages Disadvantages
Affordable price point compared to premium alternatives Lower concentration of active ingredients than premium products
Widely available in supermarkets and auto stores Mixed reviews on effectiveness for performance improvement
Simple pour-in application with clear dosage instructions Minimal measurable improvement in fuel economy in controlled tests
Specifically formulated to protect against E10 petrol corrosion May not be effective for severe deposit issues
Compatible with all petrol engines including hybrids Requires regular use for optimal results
Can be combined with other Redex products Some experts question the necessity of additives with modern fuels
Frequently on promotion in major retailers Premium fuels may provide similar cleaning benefits

Competitor Comparison

The fuel system cleaner market offers numerous options ranging from budget-friendly mass-market products to premium professional-grade solutions. Redex Petrol System Cleaner positions itself in the affordable mainstream segment, competing primarily on price and availability rather than premium performance.

How It Compares to Leading Alternatives

  • Wynn’s Petrol System Cleaner – Slightly more expensive than Redex (£10-12) but offers a larger 325ml bottle. Similar functionality and claims, with a comparable market position. Ranked higher in some expert comparisons but with a similar value proposition.
  • STP Ultra 5-in-1 Petrol System Cleaner – Priced similarly to Redex but claims additional functionality with its “5-in-1” formula. Comparable cleaning effectiveness but with more marketing emphasis on multiple benefits. Ranked #2 in Car Magazine’s best petrol injector cleaners list.
  • Forte Lubricants Specialist Car Fuel Petrol Injector Cleaner – Premium product at a significantly higher price point (£15-20). Professional-grade formulation with stronger cleaning capability. Often used by mechanics and garages rather than regular consumers.
  • Redline SI-1 Complete Fuel System Cleaner – Premium US product with the highest PEA concentration on the market (40%+). Significantly more expensive (£20+) but widely regarded as the most effective cleaner available. Less widely available in UK retail stores.
  • Cataclean Fuel and Exhaust System Cleaner – Mid-premium product (£12-15) that claims to clean both fuel and exhaust systems. Particularly marketed for emissions reduction before MOT tests. More specialized than Redex’s general maintenance approach.

In terms of cleaning effectiveness, Redex generally ranks below premium products like Redline and Forte but offers comparable performance to similarly priced competitors like Wynn’s and STP. The key differentiator is Redex’s widespread availability and frequent promotions, which make it the most accessible option for many UK drivers. For regular maintenance of vehicles without severe deposit issues, the performance difference between Redex and premium products may not justify the price premium of the latter.

Value Assessment

With a typical price point of £8-10 for a 250ml bottle containing 2 treatments, Redex Petrol System Cleaner positions itself as an affordable option in the fuel additive market. This translates to approximately £4-5 per treatment, significantly less than premium alternatives that can cost £10-15 per treatment. For regular maintenance use, this price difference becomes substantial over time.

Cost-Benefit Analysis

  • At £4-5 per treatment (treating a full 50-liter tank), the cost per liter of fuel treated is approximately 8-10 pence
  • Reported fuel economy improvements of 0.2-2% may offset some of the product cost, though results vary widely
  • Regular use as preventive maintenance may help avoid more costly repairs related to carbon buildup
  • Frequently available on promotion, further improving the value proposition
  • E10 protection provides additional value for vehicles not specifically designed for higher ethanol content fuels
  • For vehicles with existing deposit issues, multiple treatments may be required, reducing the initial value proposition

For everyday vehicles used for regular commuting, the value proposition of Redex is strong when used as preventive maintenance. The modest cost is easily justified if it helps maintain fuel system cleanliness and prevents more serious issues from developing. However, for vehicles with existing performance issues due to severe deposit buildup, the value proposition is weaker, as more expensive premium products with higher concentrations of active ingredients may provide better results more quickly.

It’s worth noting that some experts suggest that regularly using premium fuels (Shell V-Power, BP Ultimate) may provide similar cleaning benefits to basic fuel additives like Redex. For drivers who already use premium fuels, the additional value of Redex may be minimal. However, for those using standard or supermarket fuels, Redex offers a cost-effective way to add cleaning capability without the ongoing premium fuel cost.

Final Verdict

4.3/5
Overall Rating
Solid Value for Regular Maintenance

Redex Petrol System Cleaner earns a solid 4.3/5 rating as an affordable, accessible fuel system maintenance product that delivers reasonable performance for its price point. While it may not match the aggressive cleaning power of premium alternatives, it provides sufficient cleaning capability for regular maintenance at a fraction of the cost. The widespread availability in UK supermarkets and auto stores, combined with frequent promotions, makes it the most accessible option for many drivers looking to maintain their fuel system health.

The product’s strengths lie in its ease of use, compatibility with all petrol engines including hybrids, and specific formulation to address E10 petrol corrosion issues. The simple pour-in application with clear dosage instructions makes it accessible to all drivers regardless of technical knowledge. For vehicles without severe deposit issues, the cleaning performance is adequate for maintaining fuel system cleanliness and potentially providing modest improvements in performance and fuel economy.

However, expectations should be realistic. The mixed customer reviews reflect the reality that results vary significantly depending on the vehicle’s condition, driving patterns, and fuel quality. For vehicles with severe deposit issues or those seeking maximum performance improvements, premium products with higher concentrations of active ingredients may be more appropriate despite their higher cost. Similarly, drivers who already use premium fuels may see less benefit from adding Redex to their maintenance routine.

In conclusion, Redex Petrol System Cleaner represents good value for money as a regular maintenance product for everyday vehicles. It’s best viewed as preventive maintenance rather than a performance enhancer or a fix for existing problems. Used regularly as part of a maintenance routine, particularly in vehicles using standard or supermarket fuels, it can help maintain fuel system cleanliness and potentially extend engine life at a very reasonable cost.

Amazon Logo
Check Price
eBay Logo
Check Price
18
Car Emissions, Hybrids

What’s the Difference Between Hybrid and Gasoline Cars?

November 2, 2022 FTE Leave a comment

Gasoline cars have been around for more than a century and what Carl Benz started as an endeavor became the most common means of transportation. Since then, there have been dozens of new auto manufacturers, and the technology has advanced rapidly. More unique engine configurations, refined transmissions and suspension systems, and betterment in almost every aspect occurred. But the real change occurred after nearly 100 years when Toyota unveiled their first Hybrid car, the very popular Toyota Prius. Thanks to its unbelievable fuel economy, controversially silent powertrain, and fewer emissions, it had everybody in its awe. It was an all-new concept with a grand promise for the future of greener mobility.  

Although hybrid technology has matured a lot since its inception and the world is moving onto electric cars, it remains the most striking development in the auto industry. Let’s review some of the most significant differences between hybrid and gasoline cars and relive the nostalgia of technology transformation.

Powertrain and Technical Specs

Hybrid cars are similar to gas cars, but there is one significant difference, an electric motor and a battery. The engine is augmented by a battery-powered motor which supplements the available power. Not only does it enhance fuel efficiency, but it also reduces carbon emissions and offers a more refined driving experience. The motor runs all the time, especially at lower speeds, to keep the load off the engine and improve the mileage. The driver can also choose to drive in hybrid, electric-only, and engine-only modes.

The technology behind gasoline cars is straightforward. They have an internal combustion engine mated to a manual or automatic transmission, supported by a suspension setup. The engine has many other periphery parts, such as a timing belt, alternator, radiator, and fuel system, emission control system, for it to function. The engine uses gasoline to deliver a combustion process that generates power to rotate a driveshaft, which is directed to the wheels via a transmission. The technical specs and ICE (internal combustion engine) technology has been refined immensely over time, with the introduction of advanced fuel injection system, emission systems, and low viscosity oils to reduce friction.

Mileage and Fuel Efficiency

One aspect setting these types of cars apart is the fuel economy and mileage. Gasoline cars are great to drive but are known gas-guzzlers unless you opt for the more refined, smaller-capacity engines.

Hybrid cars changed this and offered improved fuel efficiency without sacrificing drivability or refinement. With the motor and engine running in synergy, the hybrid can offer greater mileage with the plugin variant ideal for short journeys running solely on battery only.

Service and Maintenance

Maintenance and servicing of the gas and hybrid cars can be different, and one has to be meticulous with their hybrid car, in contrast to an ICE car. Hybrid cars feature more complex technology, additional parts, and an intermittently running motor powered by lithium-ion batteries. Auto manufacturers have sketched an exact maintenance schedule for hybrid vehicles that must be followed to ensure long-term durability and optimal performance. A few of the essential maintenance steps involved in hybrid cars’ servicing can include a battery check, calibration, and possible recalibration of the electric motors.

On the other hand, gasoline cars are simpler to maintain, replacing fewer wearing parts every few thousand miles, mainly engine oil and filters.

Utility and Dependability

Gasoline cars have been around for much longer than hybrids, and needless to say that they served the purpose very well. Long-term durability, easy usage, a wide range of applications, and, more recently, longer service intervals.

Hybrid cars can offer excellent dependability, thanks to hybrid technology and improved fuel economy, in an eco-friendlier manner. Then came the plug-in hybrid vehicles, where batteries could be charged from home and allow short trips on battery-only power.

Some PHEVs (plug-in hybrid electric vehicles) have been tested and are known to offer up to 75 mpg in fuel economy. Many also use regenerative braking, the technology that converts the kinetic energy of the brakes into electrical energy and charges the battery while you drive.

Emission Standards

There is no comparison in this department. Hybrid cars have two main goals, fuel economy and greener functioning. These cars generate substantially fewer carbon emissions than gasoline cars and are touted as the stepping stone toward zero-emissions mobility. This helps considerably with car tax, especially with company-supplied cars.

Gasoline cars are notorious for creating pollution and emitting toxic gases into the environment. Diesel cars are even more harmful to the environment and are slowly being phased out in favor of more environment-friendly hybrid and electric vehicles on a global scale.

Types

Unlike gasoline cars, Hybrid cars are offered in different types and come with different technologies, mostly based on the battery type used in the car. Types of hybrid cars include;

  1. Conventional hybrid
  2. Mild hybrid
  3. Plug-in hybrid

Summary

 GasolineHybrid
Fuel EfficiencyPoorGood
EmissionsPoorPoor-Good
ComplexityAverageHigh
PerformanceGoodGood
MaintenanceAverageAverage
PriceAverageAbove Average
1480
hybridpetrol
Race Fuel

Race Fuel Composition and Its Effects on the Engine

October 15, 2022 FTE 1 Comment

It’s a common misconception that race fuel is an otherworldly, specially formulated concoction. Some think it is a unique blend of chemicals that a regular road-going car cannot handle. However, the reality is quite different.

We will try to separate the truth from the lies and unravel the secrets behind race fuel, its composition, and its effects on an engine.

For the sake of this argument, we will choose Formula 1 as our case study, since it is, after all, the pinnacle of motorsports. No other racing series comes even close to the level of innovation and engineering promoted by Formula 1. Therefore, it is only fitting that the series be chosen as an example.

What is Race Fuel?

In simple terms, race fuel is a highly specialized variant of regular fuel used in motorsport competitions across the globe. However, its composition and nature vary from one racing series to another.

Usually, race fuel has a high octane rating and it consists of additives that support performance. But various motorsport series regulate their race fuel and Formula 1 is no different.

So, what is unique about race fuel? Let’s look at its composition from the F1 perspective.    

Race Fuel Composition 300

The race fuel must have the following composition to be declared legal.

PropertyUnitsMinMaxTest Method
(RON+MON)/287ASTM D 2699/D 2700
Oxygenwt%3.7Elemental Analysis
Nitrogenmg/kg500ASTM D 5762
Benzenewt%1GC-MS
DVPEkPa4560(1)EN13016-1
Leadmg/l5ASTM D 3237 or ICP-OES
Manganesemg/l2ASTM D 3831 or ICP-OES
Metals (excluding alkali metals)mg/l5ICP-OES
Oxidation Stabilityminutes360ASTM D 525
Sulphurmg/kg10EN ISO 20846
Electrical conductivitypS/m200ASTM D 2624
Final Boiling PointoC210ISO 3405
Distillation Residue%v/v2ISO 3405

Such detailed guidelines show the precise measurements of the compounds involved in creating race fuel. But one thing is missing from the table, which has only recently been added to Formula 1.

We are talking about ethanol and F1’s push towards a sustainable future. The racing series has declared that from 2022 onwards, race fuel must have 10% ethanol in the mixture. In other words, F1 cars must run on E10 fuel and cut down on their dependence on pure gasoline. The percentage of ethanol or bio-fuels will increase even further from 2025 till the entire composition of race fuel consists of sustainable compounds.

But why take such radical steps?

Well, Formula 1 is trying to save the environment by shifting their cars to sustainable fuels. They also know that their technology transfers quite quickly to road cars. Therefore, if they make the change now, future cars would become more environmentally friendly. The fuel they use will be ‘greener’ and the earth as we know it, might be spared from adopting EV technology and its side effects.

Bio-fuel Ethanol and its source 100

The interesting thing about ethanol is that it is extracted from various plant materials like corn starch or other non-edible fibrous materials. You do not have to cut down mountains or drill deep holes to extract this soon-to-be precious liquid.

In other words, it is a non-exhaustive renewable source which does not produce harmful carbon gases on combustion.

The process to produce ethanol is completed in a lab after which the pure ethanol is mixed with the gasoline to make the E10 fuel we can see in F1 cars today.  

Ethanol and its effects on the engine 200

The introduction of ethanol in the mix is a good omen, right? After all, the world would benefit from manufacturers tuning their engines to support ethanol and then that technology would transfer to road cars. It sounds too good to be true, and it is!

You see, ethanol might be good for the environment but it is not suitable for a gasoline engine. So, the idea to introduce an increasing amount of ethanol in fuel looks good but it isn’t practical as of now. Perhaps, with the regulations in F1, we will get to see some improvements in the engine’s ability to adapt to such a change. But quick results won’t be possible and they might not be possible at all without sacrificing performance.

Currently, commercial fuel has 3 to 5% ethanol included in the mixture and that works. But experts believe that a 10% increase could do considerable damage to engine components. Let alone a 15% or 30% increase in composition. That’s because ethanol dries up the engine from the inside, causing damage to the injectors, fuel pipes, hoses, rubbers and other materials.

The last thing you would want is to do irreversible damage to your car. So, what is your way out?

Luckily, F1 teams and fuel suppliers have taken to the challenge and found ways to work around the issue. The Formula One racecars are a living example of how a 10% ethanol composition is efficiently possible and even sustainable.

You can take a look at the Ferrari and Shell partnership in the current F1 season. The Italian team feared a 20 HP loss due to the changes they made to their engine’s combustion chambers. The latter was necessary to mitigate the effects of the E10 fuel.

However, the team recently cut down the gap and found a way to regain the lost 20 HP, thanks to Shell. The renowned fuel supplier has found a way to make E10 fuel more powerful and efficient. In fact, Shell’s E10 fuel is expected to get even better in the coming few months. They could perfect the E10 fuel in a few years to make it commercially viable.

Unfortunately, Shell is tight-lipped on how they managed to extract 20 extra horsepower from their E10 fuel just by researching the chemicals and compounds. They do not want their rivals copying their research. But all the teams may come out with a different solution to the problem and find another unique way to tackle E10 fuels.

One thing is for sure, whatever hacks the fuel suppliers employ during this season and the next will come in handy in the future. We will know for sure once regular fuel would be forced to run a 10% ethanol composition.       

Can race fuel be used in a road car?

We have already established that race fuel is quite similar to regular fuel. But if that is true, can you use race fuel in your daily driver?

The answer is no, you shouldn’t put race fuel in your car. First off, you won’t be able to find it too easily. But if you do get your hands on some, it would be dangerous for yourself and your car to run on specialized fuel.

The biggest reason is that modern cars are designed to run on unleaded fuel. A racecar, on the other hand, is designed to run on leaded fuel. You can see the composition for race fuel in the section above and there you will find that a maximum of 5 mg/l of lead is allowed in race fuel.

Meanwhile, your road-going sedan needs unleaded fuel, meaning you can’t even put a small amount inside. Otherwise, you would mess up the entire engine and the costs of repair would shoot through the roof.

Conclusion

Ethanol is becoming an increasing factor in racecars and it will soon be a concerning factor for road cars. We will see innovations in technology, like the one we saw by Shell. But the fuel part of the equation won’t be enough unless engines are redesigned and changed alongside it.   

The efforts by Shell, its rivals as well as engine manufacturers would change the world as we know it! Perhaps, we will make it in time to stop total EV domination. Maybe we won’t make it, but the revolutionary research in fuel technology would help reduce carbon emissions a bit further. The trucks, ships and other large vehicles would be able to do their work without producing carbon emissions.

1280
bioe10ethanolfuelrace
Engine Oils

Best Synthetic Motor Oil

May 25, 2011 FTE Leave a comment

Synthetic motor oils have been around since World War II, although they were mainly used in the aviation industry back then. It wasn’t until decades later that the automotive sector pulled its finger out and started incorporating synthetic technology into the engine oil. Although more expensive, there is no doubt they offer much more significant benefits than conventional mineral oils for most automotive applications.

We will not bore you with Ester this or PAO that because it doesn’t have to be complicated; after all, the role of oil is to lubricate, cool, clean, and protect, and the best synthetic motor oils have one quality that makes them stand out from all other kinds of oil: they satisfy these four criteria very well. They can also withstand higher operating temperatures without breaking down while remaining effective at lower operating temperatures.

So you are looking for the best synthetic motor oil? Well, it doesn’t exist. What might be suitable for one engine may not be ideal for another, but we are discussing extremes here. Also, there are many similarities when comparing the highest quality synthetic blends. Many revered brands exist, such as Fuchs, Amsoil, Motul, Rock Oil, Millers, Mobil 1, Castrol, Red Line, and so on. However, it is vital that you trust the brand/supplier and then ensure that you choose the correct specification, approval, and viscosity for your engine, whether standard or modified.

Does a shear point difference of 180 versus 185 degrees matter when the oil temperature never exceeds 110 degrees, even during the most spirited driving? The very best engine oils exceed the recognized standards anyway. Our advice is if you want the best, gain trust in a brand and choose the best that the brand has to offer for your particular engine.

Why this approach? Being in the trade, we know what goes on firsthand behind the scenes. The consumer is oblivious, but we will reveal some truths because it’s one big con. This may upset a few, but we would be remiss if we told it to you any other way.

1. A £50 or $50 gallon of oil probably contains around £5 or $5 worth of ingredients.

2. There are strict controls on what base stock and additive pack you can use in order to meet the specifications set out by the vehicle manufacturer.  This means that most approved and “meets the spec” engine oils are very similar or even identical in some cases.

3. This means an oil manufacturer can’t improve on many of these oils without blending out of spec, because they are limited on base stocks and must use the same additive pack as everyone else.

4.  This means most approved oils are THE SAME, regardless of brand. It is just one big marketing competition!

5. Many oil specifications are inferior by design, and vehicle manufacturers want to keep it that way. Oil companies are trying to find ways to improve oils while still staying within the specs, but it is almost impossible when you are restricted to using the same additive pack as your competitors. This is why many now supply non-approved oils, which are superior to the approved range.

Remember, it’s a marketing competition, not a product performance competition. The best engine oil technology is reserved for specialist applications such as motorsport.

Again, if you are looking for the best motor oil, our advice is to research, gain the trust of a reputable brand, and ensure that you purchase from a legitimate vendor that will provide you with honest and accurate advice on the best oil for your particular engine needs.

1483
Best Synthetic Motor Oil
Engine Oils

What is the Best Motor Oil – Our View

April 4, 2011 FTE Leave a comment

Motor oil is used to lubricate, cool, and protect. It lubricates the moving parts and keeps your engine clean and cool by absorbing and dissipating some heat generated through friction and the combustion process. Its additive pack is also designed to collect particulates and other contaminants and transport them to the oil filter.

To understand the best motor oils for your car, you need to know different oils and what they can do for or to your engine. Quality of oil will mean other things to different people, but the better you know your engine and how it works, the easier it is for you to identify the best motor oil for your engine.

There are synthetic motor oils, synthetic blended motor oils, and regular motor oils. You need to know the difference and the attributes of all three.

Let’s have a look at synthetic motor oils. They can withstand greater temperatures while remaining stable. They are the best motor oils concerning protection and lubricity capability. They are generally better at reducing friction. They have one weakness – they can penetrate and leak more easily, but only on much older vehicles. They are also expensive, but on the upside, and depending on the quality of the additive pack, they have a longer change cycle. You can usually keep the oil in your engine for a more extended period before it needs changing. Being the best, they are widely used in performance vehicles and long-life service intervals, where the demands on oil are far greater.

Blended synthetic motor oils are blends of synthetic and regular mineral oils. This means that they have picked the best qualities of both oil types. They are usually a good compromise and the best motor oil for mid-range vehicles as they offer a good compromise between protection and cost. They can endure the more demanding driving conditions while not costing the earth. The fact that they are blended also brings down their price. Because of the mix with mineral-based oil, the risk of leakage you would get with synthetic motor oil is significantly reduced. Still, again, this only applies to older vehicles.

Lastly, we have regular mineral oil. This is considered the most inferior kind of engine oil on the market. They are, of course, the cheapest and are generally more suited for the much older or specialized vehicle. They are more susceptible to leaving the sludge behind in the crankcase. This is because they break down much easier than their synthetic counterparts.

When choosing the best motor oil, you’ll find many brands in the market. There are prominent stand-out brands as well as lesser-known ones. The key is ensuring that they satisfy the relevant SAE, API tests, etc., and are suitable for your vehicle. Check with the owner manual and choose a suitable oil based on its suitability (specification-wise), how often you change the oil (synthetic for more extended changes), and the type of driving you do.

As for the best, look for authentic, fully synthetic (PAO, Ester) base stocks with the latest nano additive packs.

1288
Best Motor Oilengine oilengine oilsmotor oilmotor oils
Biodiesel & Biofuels

What is Biodiesel and Biodiesel Production

April 4, 2011 FTE Leave a comment

Fuel prices are rising daily, making operating even at a domestic level more expensive. Anything that uses petroleum or associated products has become more expensive. The only alternative is to look for a source of fuel that is renewable and, at the same time, cheap. So far, biodiesel, a biofuel, seems to be the answer.

Biodiesel is a kind of fuel that’s made from plant and animal oils. Plants are preferred because their production is easier and cheaper than animals. On a commercial scale, the most used are soybeans, sunflower seeds, canola, and other recycled vegetable-based oils.

Biodiesel production seems to be gaining popularity because it’s generally a cheaper and more efficient way of powering up and because it’s more environmentally friendly with fewer pollutants. Some tests have shown emissions to be nil.

It also has a positive effect on reducing the level of greenhouse gases in the atmosphere. Fossil fuel emissions produce plenty of these and are “allegedly” responsible for much of the climate damage present today.

Producing biodiesel is an easy enough process so long as you obtain the correct equipment and necessary materials. As an individual, it wouldn’t be unwise to start thinking about how to make this a part of the way you power your life; the more fossil fuels deplete, the more expensive they will become.

Biodiesel, on the other hand, is relatively cheap to produce. The only thing that might cost you is the initial capital to buy the equipment, but after that, the materials you will use are cheap and easily obtainable. The supplier usually dictates commercial biodiesel costs based on where and how much he sources his raw materials.

You will not need to change your engine if you plan to start using biodiesel, providing it is fortified with the correct additives. Most engines today are compliant, although you should get a warranty that covers biodiesel use. There are advantages to your engine for using biodiesel; it is a great lubricant, but it is important to blend it correctly and fortify it with the correct additives to improve flow, protect against gelling and waxing, raise cetane, correct pH, and improve the combustion quality.

Biodiesel Production Process

The process involves chemically altering the molecular structure of organic oils. It requires a catalyst and alcohol. The organic oil is heated to a specific temperature to initiate the chemical reaction, and then the catalyst and the alcohol are added.

They are then mixed for a while and left to settle. The resulting oil will be in several layers. The topmost is biodiesel, which at this stage is called an ester.

The lower layers contain soap and glycerine. This layer facilitates separation. The soap and glycerine are drained, and the biodiesel is purified and dried. It is then filtered to remove any particulate matter before it is ready to use.

Equipment for making biodiesel has come on a long way; it is now highly automated, and you can create high-quality biofuel faster and more efficiently.

You can have your equipment custom-made depending on your needs, or you can purchase DIY using kits with instructions that are downloadable from the net for free. It’s best to start small, so you can fully understand the process. If you’re going to buy a processor, estimate your needs. It will determine the size of the processor that you will buy. They range from £500 to several thousand pounds. You will pay around £200 for a DIY kit, but kits for more complex systems will cost you more.

Microwave technology has now been incorporated into processors to make the process faster and improve the quality of the final product. It also makes it more energy efficient than the older biodiesel production because the chemical process is shorter.

It is the future. Ensure the fuel is fortified with the correct additives and can outperform standard pump fuel.

1826
Biodieselbiodiesel fuelbiodiesel productionbiofuel
Octane Boosters
Octane Boosters

Octane Boosters – Which is Best?

August 8, 2008 FTE 23 Comments

IMPORTANT UPDATE:

Please note that this article and respective tests are old and outdated.  The octane market has changed significantly over the past decade due to increased legislation on the use of anti-knock compounds, which are toxic and now heavily restricted in the UK and EU market.  Products containing more than 0.3% volume of MMT, Fe etc, can only be sold to professionals and are illegal to sell to the public. This is why you see manufacturers moving out of this market because <0.3% is inadequate for even a weak octane booster.  Amazon will no longer sell such products. Products like NF Race should not be on the market and it is only a matter of time before the HSE catch up with the importers of non-compliant octane boosters. 

So are octane boosters all they’re cracked up to be? Furthermore, do they really increase the octane rating as much as advertised?

Octane boosters are popular in the performance scene because they often regain power lost through detonation. Sold for around $10 – $50 (£7 – £30) in a handy bottle, they’re a convenient fuel additive and horsepower helper. But with so many brands on the market, you may be fooled into thinking they’re all as effective as one another.

Well, they’re not! Differing chemical compounds, additives and even volumes, mixed in with a good percentage of advertising, ‘independent” testing and testimonials all conspire to confuse the consumer away from the single most important point: does it improve the octane rating? Let’s find out the truth.

Firstly, Do I Need an Octane Booster? If you haven’t already done so then read our article “Do you really need an octane booster” first.

If you have determined the need for an octane booster then continue…

For this test we tracked down nine common makes and variations of octane booster; two fuel “additives,” a straight race fuel and a drum of Toluene. Where there were several different “levels” of octane boosters in the one brand, we chose the strongest version.

The biggest claims the manufacturers have is the amount of “points” they claim to increase. This can be ambiguous as a “point” can relate to either 1.0 RON (Research Octane Number) octane points, or 0.1RON octane points.

The list of entrants in our octane Olympics included:

• STP Octane Booster
• Wynns Octane 10+ Power Booster
• Amsoil Series 2000 Octane Boost
• Super 104+ Octane Booster
• VP C5 Fuel Additive
• ELF HTX 330 Racing Fuel Stabilizer
• Nulon Pro Strength Octane Booster
• PowerFuel Super Street Nitro Based
• PowerFuel Max Race Nitro Based
• NF Octane Booster Racing Formula
• NOS Octane Booster Racing Formula
• Toluene
• VP Motorsport 103 Unleaded Racing Fuel

The Test

To conduct these tests we contracted independent laboratory Intertek Testing Services, who would test our products on a “knock engine.” We also had to find a base fuel to add our boosters to so we went to the closest public petrol station, which happened to be Shell.

Being a performance-based test, we chose premium unleaded fuel as this represents the most common high performance fuel (i.e.: if you start with regular unleaded, you’re wasting money!) We should add that “some” boosters would have improved the octane rating of regular unleaded proportionately more than our tests with PULP.

With a RON rating at a minimum of 95, we first established the exact octane of the PULP. The biggest surprise was our randomly select Shell resulted in a quite high 96.8 RON. We precisely measured and mixed each additive to the PULP, according to the manufacturer’s recommendations and poured each into the knock engine’s tank. The compression ratio was then slowly increased until it started to knock, gaining a threshold of detonation and subsequently a maximum RON rating.

Of less importance but still worth mentioning is the design of the bottles: since most people will be pouring it straight into a tank, the design of a bottle is important to prevent any spillage on paintwork causing damage. So let’s look at the results!

Octane Points

As mentioned earlier, it’s very easy to confuse octane ratings as there are a number of separate international standards. MON (Motor Octane Number) is the number derived from a fuel when it’s applied to a test engine run at 3000rpm rather than 600rpm and with higher inlet temps and ignition advance. An known importer of 104+ fuel suggested MON is seen as a more real-world test. Although none of the fuel companies promote the MON figure which is normally between 7 and 10 numbers less than RON (Research Octane Number). Intertek’s Graeme Marks believes RON provides the general public with an idea of which additive works more effectively. And being the most commonly-used reference, we’ve decided to use RON for all our tests.

The Results

BASELINE OCTANE 96.8

11th PowerFuel Super Street Nitro Based – 946ml treats 35 litres RRP: $35
Octane Improvement: 97.0 (+0.2 RON)

Right from the start, we were told PowerFuel’s additives weren’t necessarily octane boosters, but horsepower helpers. We kept this in mind when testing both the products, but of the two, only the Super Street claimed it was specifically designed to increase the octane rating of PULP. With a 20-percent nitro mix, Super Street Nitro-Based still improved octane ever so slightly (0.2RON) but the real test for these two would really come on dyno power runs.

10th PowerFuel MaxRace Nitro Based – 946ml treats 35 litres RRP: $45
Octane Improvement: 97.0 (+0.2 RON)

Containing another 15 percent more nitromethane than the SuperStreet formula, MaxRace doesn’t claim to increase octane, but the verbal recommendation was the same, i.e.: its main characteristic is to boost horsepower, not octane. For a fair comparison of these two additives, you need to look at the power they produce. As for octane, it proved very similar toe the SuperStreet formula bumping up octane ever so slightly.

9th STP Octane Booster – 350ml treats 57 litres RRP: $10.95
Octane Improvement: 97.4 (+0.6 RON)

One of the cheapest of the group, the STP was also one of the hardest to find. Auto stores either didn’t stock it, or had simply run out! Claiming to increase the octane 2-5 points, in a well-designed-for-pouring bottle, the STP – used in the ratio determined by the label – improved the octane marginally by just over half a point. A little disappointing unless you interpret STP’s claim actually meant 0.2-0.5 points. Then it’s a good result!

8th Wynns Octane 10+ Power Booster – 325ml treats 60 litres RRP: $10
Octane Improvement: 97.6 (+0.8 RON)

Wynns was the cheapest of the lot and claimed an increase between two and five points, again not actually listing what a “point” related to. Strangely though the 10+ could indicate 1RON and if this is the case going by our tests it almost lived up to its name. But, not quite, increasing the octane rating by 0.8RON.

7th Super 104+ Octane Boost – 473ml treats 83 litres RRP: $25.95
Octane Improvement: 97.5 (+0.9 RON)

The acknowledged winner of all previous testing, Super 104+’s bottle stated we should expect an increase between four and seven point. With a new formula introduced about 12 months ago, identified by an “Eagle” logo on the back of the bottle, the Super 104+ seems to have lost its edge with a marginal gain of just less than 1.0RON.

6th VP Racing C5 – 355ml treats 75 litres RRP: $19.95
Octane Improvement: 98.1 (+1.3 RON)

VP has a strong reputation with fuels and its high octane formulas are very popular with drag racers. VP Racing’s C5 Fuel additive lacked information concerning its contents or claims, but the C5 additive still provided a reasonable increase of 1.3RON.

5th NOS Octane Booster Racing Formula – 355ml treats 60 litres RRP: $28
Octane Improvement: 98.6 (+1.8 RON)

NOS, a relatively new octane booster, comes in “1/10th” scale bottles designed to emulate the actual nitrous bottles of its successful NOS systems. The Racing Formula is the strongest of three concentrates and containing Hydrotreated Aliphatics and Methylcyclopentadienyl Manganese Tricarbonyl (try saying that 10 times in a row), it contains a lead replacement which NOS claims increases the octane rating by as much as seven points. Obviously not recommended for street use, it also included with a handy pouring spout. In testing, it proved a good result improving the octane rating by almost 2 RON.

4th ELF 330 Fuel Stabilizer – 1000ml treats 50 litres RRP: $45
Octane Improvement: 98.6 (+1.8 RON)

“If you spill it on your paintwork, don’t rub it off – rinse it with water” were the words of warning. We were also told to “pre-mix” the ELF before adding it in a fuel tank (which we were doing anyway) as the ELF has a tendency to settle to the bottom of fuel if it’s either not mixed properly or left to sit. This was made somewhat more difficult by the design of the bottle, which tends to drip when pouring. With some nasty stuff known as Aniline, the ELF 330 doesn’t claim any numbers, but provided a decent 1.8 RON point improvement.

3rd Amsoil Series 2000 Octane Boost – 354ml treats 57 litres RRP: $23
Octane Improvement: 98.8 (+2.0 RON)

Recommended for off-road and racing use, the Amsoil Series 2000 claimed to increase the octane rating by up to seven points. It came up a little short, but still proved surprisingly good with a full 2.0 RON improvement. This was good enough for the bronze medal in our Octane Booster Olympics.

2nd Toluene (Toluol) – 20 litres treats 100 litres RRP: $48
Octane Improvement: 99.3 (+2.5 RON)

Since toluene (pronounced toll-you-een – also known as methyl benzine) isn’t a commercially advertised octane booster, we were unsure of exactly what ratio to mix the clear Toluene to the fuel. From personal experience, and although we had seen high percentages increase octane even further, 30 percent was considered the maximum. Available only from various fuel distributors (it is a special order through services stations), under advice we ran a 20 percent mix (quite a lot more than the others) and saw an impressive improvement of 2.5 RON. This achieved the silver medal.

1st NF Octane Booster Racing Formula – 250 ml treats 80 litres RRP: $29.95
Octane Improvement: 99.6 (+2.8 RON)

An Australian-made product from Perth, the NF Octane Booster Racing Formula was the smallest bottle in the field, but looking at the mixing ratio, also the strongest relying on an incredibly small dose – a mere 3 percent! Claiming to increase octane as much as 6.0 RON , NF took the gold medal in a surprising tie. If it were a split decision based on concentration though, it would be the clear winner.

1st Nulon Pro Strength Octane Booster – 500 ml treats 60 litres RRP: $20.95
Octane Improvement: 99.6 (+2.8 RON)

The Australian-made Nulon Pro Strength Octane Booster is the top of the range Nulon fuel product, claiming to boost octane “up to seven number”. The Pro Strength gained a joint gold-medal equalling NF’s 2.8RON increase.

Race Fuel

VP Motorsport 103 fuel – Used straight fuel (20-litre minimum) RRP: $70
Octane Improvement: 107 (+10.2RON)

Purely for interest, we also decided to test a straight racing fuel. While there are many available (such as ELF) for no particular reason we chose VP. The highest octane VP fuel which was still totally street-legal was the Motorsport 103. Working out at $3.50 per litre and “designed for maximum power and throttle response”, the VP was very impressive with an octane rating of 107RON – more than 10RON points more than PULP. Obviously more expensive than the boosters but if octane is problem, racing fuel like VP may be the answer.

Further Information

As the name suggests, a knock engine is designed to test the detonation or anti-knock rating of fuels and fuel additives. It’s a slow revving engine capable of running most fossil fuels through an adjustable compression ratio. As the comp ratio increases, it accurately measures the intensity of the knock and determines the fuel’s octane rating.

The world standard is a one-cylinder two-valve four-stroke engine with exposed valve gear. Archaic in appearance, a “carby” is fed from any one of three fuel bowls to allow three different fuels to be run back to back. The mixture is actually controlled via gravity feed and by raising or lowering the float level of each bowl!

Run under load via a belt-drive linking the flywheel and load system, it ensures a real world situation and ensuring minimal variation between tests, oil temperature, intake air density and air temperature are all monitored and controlled.

The engine is somewhat agricultural; however its unique ability to vary the compression ratio while running between 5.0:1 and 15.0:1 is quite amazing. The operator simply winds a handle and the entire head and cylinder assembly moves up and down relative to the crankshaft.

A knock sensor measures both the frequency and intensity of the ping (as displayed on a knock metre). Figures are then cross-referenced on a chart using the information provided by the knock meter, plus the height of the head and barrel. Finally, knock intensity is figured in and the fuel’s octane rating determined.

Taking two hours to warm, this $200,000 engine is super robust and rarely needs rebuilding. Individual tests can then proceed at approximately $120 per test sample.

Being subjected to so much detonation, you can only imagine how much maintenance an engine of this nature must need. Interestingly, this isn’t the case as the piston and rod assembly are rejects from a monstrous ship engine (just kidding)! They’re huge with an incredibly thick piston crown contributing to a combined gudgeon pin and piston weight of 1794 grams! Likewise, the rod weighs an astonishing 1929 grams. The bottom line is these engines which have replacement value of over $200,000 and almost never require rebuilding.

Dyno Boosters

Ultimately, the role of an octane booster is to regain horsepower lost through detonation or retarded ignition timing due to detonation. But two of our products, the nitro additives, weren’t specifically designed to increase octane. Instead, they contained a mix of nitromethane (the petrol Top Fuellers run) in a “percentage” concentrate. Power Fuel’s Super Street and Max Race additives had 20-percent and 35-percent nitro respectively, and the Australian importer specifically claimed they would increase power, not necessarily octane.

So, we took those two products and the two best-performing octane boosters to MRT Performance for some Dyno Dynamics dyno testing. Interestingly, we were going to use MRT’s rally Civic, which normally runs on avgas. On PULP – even with the booster – it was pinging too much, so a Jap-spec EF Honda Civic was used with a 1.6-litre VTEC and about 10.0:1 comp ratio.

The graphs tell the story though, and to be fair to the products, with variables such as heat soak, the results weren’t as conclusive as could be gained from an engine dyno. But that is not to say the products don’t work. As our test proves, they do, but it’s not as easily measured on a chassis dyno. Plus the Civic had no detonation problems on PULP, further hampering the apparent effectiveness of the boosters.

Summary

Both the Nulon Pro Strength and the NF Racing Formula rated the best octane boosters in our test. And considering that less NF was needed than Nulon, it evens out a little with a slightly higher cost. Still, both proved extremely effective at increasing octane, even outranking Toluene, which needs much higher levels of concentration.

The VP Motorsport 103 fuel was an interesting exercise, and if a little more effort (i.e.: buying it from the selected outlets) is worth the octane, it’s a good representation of what to expect from straight racing fuel.

The FuelTechExperts Team

1276
MONoctaneoctane boosteroctane testRON
Octane Boosters

Do You Really Need an Octane Booster?

July 18, 2008 FTE 1 Comment

We get asked time and time again if octane boosters work. The answer is yes and no because it depends on the application and what you are trying to achieve. Let us clarify.

Firstly, we need to understand why octane boosters exist in the first place – to prevent the onset of detonation. Detonation is described as: “Excessively rapid burning of the fuel mixture, often caused by auto-ignition due to excessive temperatures in the combustion chamber, incorrect ignition timing, lean mixtures, too high a compression ratio, or unsuitable fuel.” A too-low an octane rating of the given fuel. Heard as a faint, metallic rattle, detonation is accompanied by a loss of power and can cause severe damage to piston crowns. It is also known as pinking.

The significance of detonation is such that many companies produce fuel additives designed to increase the inherent octane rating of a given fuel. The proliferation of octane boosters has, in part, come about in recent times thanks to low-quality fuels, particularly with the demise of leaded fuel, which had a much higher octane rating.

This presents a problem for high-performance cars designed to run on higher octane or 100 RON Japanese fuel. Japanese import performance cars, Subaru’s STI WRX, for example, run an ECU program for 98 to 100 octane fuel and may detonate on lower octane fuels if the ECU cannot compensate for the lower octane. Some have even had ECU upgrades that require 102 RON fuel, which is readily available in Japan but not in Europe or the US, or certainly not from a conventional gas station.

Usually, octane boosters would be of little use if an engine is not detonating. However, with more sophisticated ECU/EFI programming, many engines can optimize the engine management system by advancing the ignition timing and thus benefit from higher octane fuel. This means more power. They are also advantageous as an “octane buffer” for highly tuned vehicles. For example, suppose your vehicle’s fuelling and ignition are mapped for 98 octane, and you are using 98 octane fuels. In that case, it may be beneficial to use an octane booster to increase the octane to 99 or 100 as a safety margin in the event of having “degraded” fuel, etc.

Another example is Honda’s S2000 2.0-liter engine, which runs a high 11.0:1 compression ratio and relies on advanced engine management as much as quality fuel. However, it can sustain its power on a lower octane pump fuel because the ECU compensates. This is achieved by reducing the ignition timing, which results in a degradation in performance. This is where a modern vehicle with advanced engine management can take advantage of a higher octane fuel or a base pump fuel plus an octane booster.

Also, any turbo owner who has experimented with boost will know if you run too much, it will detonate, so improving the octane is vital for maximum performance. However, non-performance vehicles designed and mapped to run comfortably on base pump fuel, say 95 RON, will not gain a performance advantage. Sure, many octane boosters offer other benefits, such as valve protection, but they will provide additional power unless the vehicle in question has been remapped, chipped, or tuned in so that it can take advantage of a higher octane fuel.

If you take a 25 year old Ford Fiesta designed to run on 95 RON pump fuel, there will be no performance increase from using an octane booster. But if you have the ECU (fuel and ignition) remapped for higher octane, then it will be necessary to use either a higher octane fuel or a base fuel plus an octane booster to achieve the power safely. Octane boosters are popular in the performance scene because they often regain power lost through detonation due to tuning upgrades.

Unfortunately, some popular TV car shows have been quick to rubbish the use of octane boosters. One, for example, demonstrated the use of several products on low-performance cars with basic engine management, such as a Peugeot 106, basic Clio, etc. We could have told you the results before they even started. They were all vehicles designed to run on standard octane pump fuel, and their ECUs were not sophisticated enough to take advantage of a higher octane fuel, let alone an octane booster. Of course, it doesn’t help when many manufacturers put ridiculous claims on their labels that octane boosters will increase performance on all vehicles when they clearly won’t.

To summarise:

You can/should use an octane booster if:

1.  You have a modern, high-performance vehicle and wish to make the most of the available power, and you cannot easily obtain a good quality high octane fuel in your given area.

2. Your vehicle manual specifies a particular high octane fuel (i.e., 98 RON super unleaded), but you can only find 97 RON or below. To clarify, many modern cars will adapt accordingly if using a lower octane fuel than that specified, but a reduction in performance will result.

3.  You suspect that you may have a tank of old or degraded fuel where the octane value has deteriorated.
Your engine has been explicitly mapped for a higher octane fuel, and/or the engine has been mapped very closely to the edge (detonation threshold), and you require an increase in octane to provide a buffer.

4. You have modified your vehicle in other ways, such as an increase in the turbo boost pressure making detonation much more likely.

5.  You are about to go on a track day where the engine will spend most of its time under considerable stress, and you wish to prevent the onset of detonation under prolonged high-stress conditions.

6.  You are not looking for a performance increase but wish to lubricate and protect the valves using an octane booster in small regular dosages.

We hope this helps clarify any confusion.

1855
fuel octaneMONoctaneoctane additivesoctane boosterOctane Boostersoctane ratingoctane testRONRON increase

Posts navigation

← Previous 1 2 3

categories

Archives

  • August 2025
  • July 2025
  • June 2025
  • May 2025
  • April 2025
  • March 2025
  • February 2025
  • January 2025
  • December 2024
  • November 2024
  • October 2024
  • June 2024

Tag Cloud

Tags
2-ehn, airflow sensor cleaners, carbon removal, car emissions, diesel emissions, dpf cleaner, dpf cleaners, dpf cleaning, dpf removal, ecu, egr cleaner, egr cleaning, egr delete, emissions, engine chipping, engine mapping, engine oil, fuel additive, fuel additives, fuel catalyst, fuel conditioner, Fuel Economy, fuel saver, fuel savers, fuel saving, fully synthetic oil, gas saver, gas savers, improve mpg, increase gas mileage, increase mpg, low sap oil, MON, mpg, octane, octane booster, Octane Boosters, octane test, oil additives, petrol, reduce fuel costs, remap, RON, tuning box, vehicle emissions
Contact us

Email: support@fueltechexperts.com

Info
  • Privacy Policy
  • Terms of Use
  • Sitemap
  • Cookie Policy (UK)
  • https://ec.europa.eu/consumers/odr
Find us on:

Newsletter

* indicates required


Copyright © 2011-2024 Fuel Tech Experts All Rights Reserved.

Manage Consent
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes. The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Manage options Manage services Manage {vendor_count} vendors Read more about these purposes
View preferences
{title} {title} {title}